Chillers that use external water tanks are susceptible to foreign substances entering the system. With Orion's distinctive heat exchange coil system, there is less likelihood of clogging and yet, in the unlikely chance that clogging does occur, the coil can be removed for cleaning.

Slim vertical design. The unit can be placed with the back side against the wall.

Wide temperature setting range of 5 to 30 ℃. Original, easy-to-set temperature controller.

The following page shows application examples of the RKL Unit Cooler. Have a look!

*1 Cooling capacity is at least 95% of the noted value.
*2 When the liquid temperature 20 ℃ and the ambient temperature is 32 ℃.
*3 The figure noted is when operating at the highest capacity of its operable range.
*4 The fan motor static pressure is 20 Pa.
*5 Operating noise levels are from a position of 1 m in front of the unit and at a height of 1 m.
Note 1: The recommended liquid (chilled water) for use in this product is clean water or a 30% to 40% solution of industrial-use ethylene glycol. However, note that there will be a drop in cooling capacity of 10% if using a 30% to 40% ethylene glycol solution. Alternatively, if conditioned water is used, then it should have an electrical conductivity of at least 1 µS/cm.
Note 2: Heat output from the product (in kW) is approx. 1.3 times that of its cooling capacity.

*1: For anchor fixation
*2: RKL-2200-B1 hole pitch sixes are compatible with this chiller. When upgrading from RKL-2200-B1, please use the pitch sizes listed here.

*1: For anchor fixation
*2: RKL-3750-B1 hole pitch sixes are compatible with this chiller. When upgrading from RKL-3750-B1, please use the pitch sizes listed here.

*1: For anchor fixation
*2: RKL-5500-B1 and 7500-B1 hole pitch sixes are compatible with this chiller. When upgrading from RKL-5500-B1 and 7500-B1, please use the pitch sizes listed here.